Home > Error Code > Ineligible Transaction

Ineligible Transaction

Contents

If the cash dispenser operates normally while performing a test dispense, put it back into service. Result: No money is dispensed, screen and receipt display system unavailable. If two or more of the same type cassette are installed, inject a new cassette ID into one of the cassettes that is different from the other cassette. If the sensor is not being pressed then the error will occur.

Access ATM ยป Hyosung Error Codes - Code: Description: Resolution: 0: Normal Status: Normal Status: 20001: Unable to detect a cassette: Remove and replace cassette - Check the micro-switch located on Clear the error. Recommended Action: Verify that the Printer has paper in it. Error Code: 301(31h)[1] Description: Low level in cassette. http://oceanatm.isp50.com/tech-support-error-codes/

Ineligible Transaction

If the voltages are correct, and the cables are undamaged and correctly connected, causes of this error may be a defective cable, a defective printer, printer control board, or the main Error Code: 45 (2Dh) Description: Diverter error Recommended Action: This error occurs when the diverter is in the wrong position during a dispense. 1. C0034 Double Note detect module failure Double detect module reporting error; check wiring to the module.

  1. Recommended Action: Check data and power connections to the dispenser device.
  2. Recommended Action: Restart the operating system.
  3. Make sure that the cassettes are installed and locked before performing a test dispense or live transaction.
  4. Contact your ISO or processor if you encounter an excessive amount of these errors, or you cannot complete a test transaction because of this error.
  5. Code reported by host processor (Shazam).
  6. Clear terminal error code.
  7. C005F Dispense command error Re-initialize machine; verify connections; check for unplugged sensors.

The most probable cause is either mechanical or electrical failure of the note diverter in the note transport module. Otherwise, replace the dispenser. Install the Reject Vault. Atm Error Code 3-da000(60) Complete several test dispenses.

User Generated Content Disclosure Forum member posts, comments and responses are not provided or commissioned by the bank advertiser. Cannot Process Transaction Atm If your pc starts successfully it proves that one with the removed components devices was the cause with the STOP message. If the status clears and the return code are normal place the cash dispenser in service. http://creditcardforum.com/the-lounge-f20/3562-debit-card-atm-error-codes-the-secrets-behind-them.html Verify that each cassette is placed in its designated feed channel.

Recommended Action: This error code occurs while running the dispenser on the NMD test software and when too many notes are requested during a dispense command. Atm Error Code 3-da001(10) C00FF Sensor blocked N/A CANCE User canceled transaction at surcharge This is not an error, but rather a statistic to notify how many users respond "no" to the surcharge notification. Make sure that note qualifier and the note transport modules are mechanically aligned. The cash dispenser will attempt to complete the transaction from other cassettes.

Cannot Process Transaction Atm

Results: No money is dispensed, screen and receipt display system unavailable. http://www.saetechnologies.com/bank-error-code-d0102/ Use a business card or stiff paper to clear jams. Ineligible Transaction Error Code: 158 Description: Format command to electronic journal failed. Atm Error Ineligible Transaction C005D Double detect constantly Inspect double detect module and adjust as necessary.

Remove any jammed bills from the dispenser. Results: No money is dispensed, screen and receipt display system unavailable. Error Code: 147 Description: Error in reply from electronic journal. D0091 Bank unavailable Code reported by host processor. Atm Says Unauthorized Usage

It will not place the cash dispenser "Out of Service". You may need to remove the printer to clear jams. Recommended Action: This error code indicates that notes were rejected during the transaction or test dispense operation. Error Code: 366 Description: Dispenser cassettes disabled.

If replacing the modem does not correct the problem, replace the main board. Atm Error Code D2516 Loose belts can slip off rollers and block sensors. 24A15 CDU detects bills prior to dispensing While the ATM was initializing it detected a blocked sensor in the cash dispenser (CS4A Recommended Action: This error may occur anytime that a cassette is removed from the cash dispenser with the AC Power ON.

Error Code: 35 (23h) Description: Mistracked note at double detect.

Recommended Action: This is a timing wheel or timing wheel sensor error.. 1. Replace the dispensing mechanism. C0056 Exit gate sensor failure Check condition of exit gate and the exit gate sensor. Genmega Error Codes A normal return code for this test dispense operation is "4 1 1 1 1" for a four cassette dispenser.

Verify that CS8 or encoder wheel sensor is in place and wire connection is good. If these actions have no effect, replace the dispenser. Check the Reject Analysis; this may help determine the cause. Error Code: 140 Description: Time-out waiting for printer to be ready.